SMCWF01-Z Key Fob Quick Start Guide
4
Troubleshooting
If a key fob does not appear to be working properly or is not
being located by the TouchScreen during the Add process:
¾
Verify that a new battery has been properly installed
(see step 1, “ Pre-Installation Guidelines.”
¾
Confirm that the key fob has been defaulted.
Copyright
©
2010 SMC Networks
Page 2
All Rights Reserved
SMCWF01-Z 8/17/10
5
Control Buttons
With your key fob, you can arm your system (in Arm Away or
Arm Stay modes), disarm it, or send an Emergency alarm for
police assistance.
Note:
When a key fob button is pressed, the LED flashes
red once to show it has contacted the TouchScreen. If the
key fob is out of range of the TouchScreen, the LED flashes
red three times quickly.
System Status
Press the System Status button 1.5 seconds to light the LED
and show the current status of the security system.
The LED flashes red once to show it has contacted the
system and then:
¾
Lights green for 3 seconds if the system is disarmed.
¾
Lights red for 3 seconds if the system is armed.
¾
Lights orange for 3 seconds if the system is not ready to
be armed (for example, if a door is open).
¾
Flashes 3 times every 5 seconds if the key fob has been
defaulted and is ready to pair to the TouchScreen.
Arm Away
Press the Arm Away button 1.5 seconds to arm the system in
Arm Away mode (no one is in the premises). For information
about arming mode, refer to the TouchScreen User Guide.
The LED flashes red once to show it has contacted the
system, then lights red for 1 second. The Exit Delay starts
(default 30 seconds—TouchScreen beeps during this period).
If the system is not ready for arming, such as when a door or
window is open, the LED flashes orange 7 times.
Arm Stay
Press the Arm Stay button 1.5 seconds to arm the system in
Arm Stay mode (people are in the premises). For information
about arming mode, refer to the TouchScreen User Guide.
The LED flashes red once to show it has contacted the
system, then lights red for 1 second. The Exit Delay starts—
twice as long as the period configured for Arm Away (up to
120 seconds, with no beeping from the TouchScreen).
If the system is not ready for arming, such as when a door or
window is open, the LED flashes orange 7 times.
Disarm
Press the Disarm button for 1.5 seconds to disarm the system
without entering the premises.
The LED flashes green once to show it has contacted the
system, then lights green for 1 second. The Exit Delay
starts—twice as long as the period configured for Arm Away
(up to 120 seconds, with no beeping from the TouchScreen).
Panic
Press the Panic button for about 2.25 seconds to send a
silent alarm to central monitoring for police assistance. The
TouchScreen does not react in any way; however, the
History tab on the Security widget shows an alarm was sent.
Also, contact persons will receive email and SMS
notifications if they are configured to do so.
The LED flashes red once to show it has contacted the
system, then flashes red 7 times.
Key Fob Action
LED Display
Arming Red
Disarming Green
System Not Ready to Arm
Orange
continued on next page
