6
INTRODUCTION TO THE TIME CLOCK
The time clock is accessed by pulling down the bottom flap of the front cover. There are
four buttons:
“Clock”, “Timer”, “Man” and “Auto”.
“Clock” and “Timer”: Used to enter and exit the timer settings. Once
the timing program is set they are not used again unless you wish to alter the
program times.
“Man”: Used to change settings during programming. Used also to manually
turn the chlorinator and pump on and off.
“Auto”: Used to advance to the next setting during programming. Used also
to enter the automatic time clock operation.
The time clock has a 24-hour clock face which is divided into 48 segments, each of 30
minutes duration (Fig. 1). Each of these segments can be turned ON (darkened) or OFF
(not showing) as required, allowing for very flexible operation of your chlorinator and
water filtering.
Fig. 1
