Sentry 5000-32-IT Controller
Page 9 of 82
2.1.2 Internal Components
shows the internal components of the Controller Platform.
The Controller Platform components include:
(1) Internal view of TPC display
(2) Internal view of door lock
(3) Cover panel containing single board computer (SBC) with communication port adapter board
(4) ProtoNode communications gateway (or Sentry InSite Appliance) for multi-protocol and InSite
interface
(5) AC/DC Power Supply
– not required for controllers using DC power source
(6) Optional accessory is mounted on the DIN rail
(7) Power connections and fuses
(8) Gland Plate (floor of unit)
2.2
Stacks
Stack Assembly selection during the system design phase differentiates Controller configurations. This
section introduces the stack concepts and identifies typical Controller configurations. Each Stack is an
assembly of two printed circuit boards where the bottom board is a Carrier Board containing eight relays
and the top board varies by the application requirement.
Figure 2: Controller/Platform Internal View
2
1
3
4
5
6
7
8
Summary of Contents for Sentry 5000-32-IT
