ASSEMBELY SHOULDER BRUSH CUTTER
STEP-2
Join the handle to the
brush cutter attachment.
Fitting bolts X 4 PCS
STEP-1
Install the engine to the
brush cutter attachment.
Fitting bolts X 4 PCS
STEP-3
1. Passing the throttle wire with the
round the main pipe grip, attach
the assembly to the engine.
2. Fasten the lead wire with the
round terminal to the clutch case
with a bottom bolt at the air
cleaner side which fixes the
clutch case on the engine.
3. Turn the throttle wire round from
the muffler side.
4. Secure the lead wire/throttle wire
to the machine, using the wire
band.
STEP-4
Join the safety guard to the
brush cutter attachment.
Fitting bolts X 2 PCS
STEP-5
Blade Mounting
1. Attach the Prevention Plate to the bottom
of the Gear Case using the Cross Screw.
2. Install the Blade Clamping plate onto the
gear shaft.
3. Tightly fasten the Blade Clamping Plateb,
Stabilizing Plate & Washer with Blade using
the Hexagon Nut
・
Use the spanner.
・
Be careful of injury from the BLADE.
・
When mounting the blade, bear in mind
that the direction of rotation is
counter clockwise.
