SMC Networks ISE30 Series, Manual

Page: 26 / 38

Descriptions
Analog Output
Voltage output Current output
1
0.6
Pressure
5
B A C
Analog
output
[V]
4
2.4
Pressure
20
B A C
Analog
output
[mA]
Functions
(Refer to pages 10 and 11 for details.)
Copy function
Auto-preset function
Precision indicator setting function
Peak display function
Bottom display function
Key lock function (Security code
input can be selected.)
Zero-out function
Anti-chattering function
Unit display switching function
Power-saving mode
kPa
⇔
MPa switch function
Display resolution-switch function
Copies the settings of the master sensor to the slave sensors.
Calculates and enters rough set values automatically from the actual operating conditions.
Evens out deviations in the displayed value.
Can retain the maximum pressure value displayed during measurement.
Can retain the minimum pressure value displayed during measurement.
The key board can be locked to prevent any incorrect function of the operation switch.
The pressure display can be set at zero when the pressure is open to the atmosphere.
Prevents possible malfunction due to sudden fluctuations in the primary pressure by adjusting the response time.
Can convert the display value.
Reduces power consumption.
Converts display resolution from the normal value of 1/1000 to 1/100.
It reduces the monitor to flicker.
Converts the unit between kPa and MPa.
Displays present unit (only for units of kPa and
MPa).
Unit display
Lights up when switch output (OUT1) is turned ON.
Output (OUT1) display (Green)
Use this button to select the mode or increase the
ON/OFF set-value.
It is also used for switching to the peak display
mode.
button (UP)
Use this button to change the mode or confirm the
set-value.
S button (SET)
Use this button to select the mode or decrease the
ON/OFF set-value.
It is also used for switching to the bottom display
mode.
button (DOWN)
Lights up when switch output (OUT2) is turned ON.
Output (OUT2) display (Red)
Displays the current pressure, set mode, and error
code. Always use red or green display; or switch
between green and red according to the output.
Four different display settings are available.
LCD
Range
For vacuum
pressure
For compound
pressure
For positive
pressure
Rated pressure range
0.0 to –101.0 kPa
A
—
B
0
C
–101 kPa
–100.0 to 100.0 kPa — –100 kPa 100 kPa
–0.100 to 1.000 MPa –0.1 MPa 0 1 MPa
3
Series
ZSE30A
(
F
)
/ISE30A
2-Color Display
High-Precision Digital Pressure Switch