i Safety Instructions
i - 4
i.2.5 Warning related to pneumatic circuit
Warning
Be sure to release compressed air from the product and ensure the internal pressure is
zero before replacing or cleaning the parts of the product. If the compressed air is left in the
product, when some part is loosened, it may cause sudden lurching or other unexpected
accidents.
i.2.6 Location of hazard label
Warning
- Fully read and understand the contents of the hazard labels.
- Do not peel or rub off the hazard labels.
- Carefully confirm where the hazard labels are affixed.
Front
WARNING
警告
!
1 Remove panels for maintenance only.
2 Never insert anything into product to ensure
safety.
3 Cut power prior to maintenance to prevent
electric shock.
4 Settle product to room temp.before main-
tenance toprevent burn or frostbite.
5 Ensure zero air pressure before replacing parts.
1 点検以外はﾊﾟﾈﾙを取り外さないこと。
2 回転物があるので指、棒状の物を差し
込まないこと。
3 感電の恐れがあるので、点検の前には電源を
切ること。
4 火傷の恐れがあるので、点検の前には装置を
常温にすること。
5 部品交換の前には必ず、空気圧力を"0"に
すること。
!
