background image

Air Dryer

 

i Safety Instructions

 

 

i – 2 – 7     Danger of Refrigerant 

Caution 

This product uses Fluorocarbon (HFC) as a refrigerant. 

This product is specified by “Class 1 Fluorocarbon Collection and Destruction Law in Japan.” 

It is strictly forbitten to emit Fluorocarbon to the atmosphere. Before you repair this product, 

you should collect the refrigerant with “Refrigerant collector.” Then, ask a destruction agency 

to dispose of collected refrigerant. No one but someone have enough knowledge and 

experience about the product and incidental device should do the collection of the refrigerant. 

No one but service person or qualified person should remove the cover panel of the product. 

The quantity and the sort of the Fluorocarbon are mentioned on the specification label that are 

explained on Page i - 7. 

 
 
 
 

Front 

Front 

 

Fluorocarbon Collection and Destruction Law in Japan

フロン回収破壊法第一種特定製品

This product uses
                      Fluorocarbon (HFC) as a refrigerant.

1  It is strictly forbidden to emit Fluorocarbon
    to the atmosphere.
2  When disposing this product, Fluorocarbon
    must be collected in an appropriate manner.
3  The kind of Fluorocarbon and the amount used
    in this product is prited on the name label.

この製品には冷媒として、

           フロン類(HFC)が使われています。

1 フロン類をみだりに大気中に放出することは

   禁じられています。

2 この製品を廃棄する場合には、フロン類の回収が

   必要です。

3 フロン類の種類及び数量は、型式銘板に記載

   されています。

 

 

 

 

 

 

 

 

 

 

 

IDU22E, 37E 

IDU55E, 75E 

i

  - 

Summary of Contents for IDU11E-23-C,K,L,R,T,V

































Reviews: