SMC Networks IDFB60-23-C Operation Manual Download

Page: 10 / 52

IDX-OM-V024

Chapter 1

Safety Instructions

1.4

Limited Warranty and Disclaimer/ Compliance Requirements

IDFB60/70/80/90 Series

1-6

1.4 Limited Warranty and Disclaimer/ Compliance

Requirements

The product used is subject to the following “Limited warranty and Disclaimer” and “Compliance
Requirements”.
Read and accept them before using the product.

Limited Warranty and Disclaimer

The warranty period of the product is 1 year in service or 1.5 years after the product is

delivered. Also, the product may have specified durability, running distance or replacement

parts. Please consult your nearest sales branch.

For any failure or damage reported within the warranty period which is clearly SMC's

responsibility, a replacement product or necessary parts will be provided.

This limited warranty applies only to our product independently, and not to any other

damage incurred due to the failure of the product.

Prior to using SMC products, please read and understand the warranty terms and

disclaimers noted in the specified catalog for the particular products.

Compliance Requirements

The use of SMC products with production equipment for the manufacture of weapons of

mass destruction(WMD) or any other weapon is strictly prohibited.

The exports of SMC products or technology from one country to another are governed by

the relevant security laws and regulation of the countries involved in the transaction. Prior

to the shipment of a SMC product to another country, assure that all local rules governing

that export are known and followed.

CAUTION

The product is provided for use in manufacturing industries.

The product herein described is basically provided for peaceful use in manufacturing

industries.

If considering using the product in other industries, consult SMC beforehand and exchange

specifications or a contract if necessary.

If anything is unclear, contact your nearest sales branch.

CAUTION

SMC products are not intended for use as instruments for legal metrology.

Measurement instruments that SMC manufactures of sells have not been qualified by type

approval tests relevant to the metrology (measurement) laws of each country. Therefore, SMC

products cannot be used for business or certification ordained by the metrology (measurement)

laws of each country.

Summary of Contents for IDFB60-23-C





















































Search results

Summary of Contents for IDFB60-23-C

Reviews:

Related manuals for IDFB60-23-C

Brands by name

Popular brands

SMC Networks IDFB60-23-C, Operation Manual

Search results

Summary of Contents for IDFB60-23-C

Reviews:

Related manuals for IDFB60-23-C

Brands by name

Popular brands