IDX-OM-V022
Chapter 1 Safety Instructions
1.2
Hazard Classifications & Position of Hazard warning Labels
IDF60/70/80/90 Series
1-2
1.2 Hazard Classifications & Position of Hazard
warning Labels
To help you recognize the hazards, the unit utilizes special graphics to indicate different hazards.
Confirm the contents of the hazards and the location of the labels before operation.
1.2.1
Hazard of Electricity
1.2.2
Hazard of Hot Surface
1.2.3
Danger of Compressed Air Circuit
- Only properly trained, qualified personnel are allowed to perform tasks such as:
Operation, installation, relocation of product and maintenance works.
- Should any problem occurs, address it according to instruction in this manual.
- Identify problems following the guidelines in Chapter 6 for Troubleshooting before
proceed with maintenance works.
- In the event of any problems the product should not be turned on. When the
product fails or a fault occurs, shut down immediately, and contact for service.
WARNING
Inside of this product, there is a power-supplying section with high voltage
separated by the cover panel. Do not operate the product with the cover panel off.
WARNING
Since this product has parts that become hot during operation, there is a possible
risk of burn-associated injuries. These parts remain hot even after power is off.
Wait until the unit has cooled down before touching.
WARNING
Before replacing or cleaning parts, be sure to relief the pressure remained inside of
the product until the gauge indicates
“0”. High pressure can propel object at high
velocity and cause injury.
WARNING