![background image](http://html1.mh-extra.com/html/smc-networks/idf15e1-10/idf15e1-10_operation-manual_1299706021.webp)
2. Transportation and installation
2 - 7
Residual compressed air pressure release procedure
1. Even while the dryer is removed, only when compressed air is needed, open the bypass piping valve.
2. Close the compressed air inlet and outlet valve.
3. Unscrew the front panel fixing screw (in 2 points) and remove the front panel with upholding it a little.
4. Open the residual pressure release cock of auto drain tube, and release compressed air pressure left
inside of the product. Refer to the figure at below.
Case Assembly
The remainder depressure cock.
∗
It opens when turning in the direction
of the arrow of figure.