SMC Networks HRS050-A*-20 Series, Operation Manual

Page: 97 / 156

HRX-OM-O021
Chapter 5 Display and setting of various functions
HRS Series 5.15 Alarm customize function
5-45
34.
Select the changing of electric resistivity rise from the table below with [ ▲ ] key or [ ▼ ]
key, and confirm by pressing “SEL”.
Table
5.15-18
List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available if the
setting of the DI option is OFF.
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
○
Changin g of upper limit of electric resistivity rise Setting and checking
35.
Press the [SEL] key once.
The set screen of the changing of upper limit of electric resistivity rise is displayed on the
digital display.
PV
SV
36.
Select the changing of upper limit of electric resistivity rise from the table below with [ ▲ ]
key or [ ▼ ] key, and confirm by pressing “SEL”.
Table 5.15-19 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available if the
setting of the DI option is OFF and changing
of Upper limit of electric resistivity rise is OFF.
to
Sets Upper limit of electric resistivity rise.
Set unit is 0.1M
Ω
･
cm unit.
Changing of
electric resistivity drop Sett ing and checking
37.
Press the [SEL] key once.
The set screen of the changing of electric resistivity drop is displayed on the digital
display.
PV
SV