![background image](http://html.mh-extra.com/html/smc-networks/glsc/glsc_quick-start-manual_1300020003.webp)
Setting-Up
1. Installation
There are two options:
•
Wall-mount -
Insert two screws into the wall-mount hole fixtures
•
Desktop -
Affix the 4 self-adhesive pads as indicated.
Under Panel View of Housing
2. Setting N-Way
Use the N-Way switch located (on the rear panel) to
enable/disable auto-negotiation feature.
•
ON -
Enables auto-negotiation feature
•
OFF -
Disables auto-negotiation feature
NOTE:
Connected device must have auto-negotiation capabilities
activate N Way
View of Switch on rear panel
English
English
Features
• Complies with IEEE 802.3ab 1000BASE-T and IEEE 802.3z
1000BASE-LX
• Auto-MDI/MDI-X support for RJ-45 port
• Auto-polarity correction for RJ-45 port
• Low power consumption
• Status LEDs for quick and easy network monitoring
• Compatible with other Gigabit 1000BASE-T/LX devices
• SC fiber interface
• External power supply
• FCC Class A & CE approved
General Guide
3
4
(unit only available with
SC connector)
Front Panel View
Rear Panel View
Self-adhesive
pads
Self-adhesive
pads
Holes for wall-mounting
English
Fiber optic port
Status LED
indicators
UTP port
(RJ-45)
1000BASE-T to 1000BASE-LX Media Converter