SMC Networks FAS-200 User Manual Download Page 73

Page: 73 / 98

FLEXIBLE ASSEMBLY SYSTEM

FAS200

User Manual for FAS200

- 71 -

FAS-212

SCREWS INSERTION MODULE

Figure 75: FAS212 Screws Insertion

Module.

This module carries out the final operation to fit components to the

assembly under construction, and involves the insertion of four screws in four

threaded holes in the base body of the turning mechanism.

The technology used to effect the movements at this module, based on different

pneumatic cylinders, means it is only possible to unload the screws at a single

point. In consequence, an additional component is needed for the transfer to

give it successive turns, so that four insertion cycles at this module will result in

the four screws being fitted.

The components used for this particular operation are a pneumatic lifting

cylinder on which a similarly operated rotary actuator is fitted.

Summary of Contents for FAS-200



































































































Search results

Summary of Contents for FAS-200

Reviews:

Related manuals for FAS-200

Brands by name

Popular brands

SMC Networks FAS-200, User Manual

Search results

Summary of Contents for FAS-200

Reviews:

Related manuals for FAS-200

Brands by name

Popular brands