-11-
No.EX##-OMO0004-A
2. Wiring of the power supply
Connect the power supply to the power supply connector (1 pc.).
The power supply connector is suitable for use with wire sizes from AWG28 to 16 (0.14 mm
2
to 1.5 mm
2
).
The EX180 power supply structure consists of two systems. These systems can operate alone or with
another power supply.
Wire to the assigned pins. (Figure 4, Figure 5)
The tightening torque is 0.22 to 0.25 Nm.
●
Note
Ground the FG terminal with a ground resistance of 100
Ω
or less.
A. Dual power supplies
B. Single power supply
Figure 4 Figure
5