SMC EliteConnect WLAN Security System User Manual
B-5
connected Access Manager. For an Access Manager, this command includes up
time and the IP address and the connect time for its Control Server. For an
Access Manager, this command includes a combination of the Control Server
and Access Manager status.
show ether
Display device Ethernet (MAC) address(es).
show product
Display product name.
show serial
Display product serial number.
show version
Display the software version. Also shows the alternate (upgrade, downgrade or
same) version of the software, if one exists on the system.
B.6
Diagnostic Log Commands
show logs [severity] [max lines] [for count time-units]
[reverse]
Display entries in the error log.
clear logs
Clear the error log.
severity
crit
critical log entries
err
error and critical log entries
warn
warning, error and critical log entries
notice
notice, warning, error, and critical log entries
info
information, notice, warning, error, and critical
log entries
lines
the maximum number of lines displayed. The default is 23.
time-unit
seconds, minutes, hours, days, weeks and months (31 days);
the default is one day.
reverse
reverses the order of the display, which is normally the most
recent events first.
Summary of Contents for ELITECONNECT SMC2504W
