SMC Networks D3CM1604 Administrator'S Manual Download

Page: 51 / 64

Troubleshooting Procedures

D3CM1604 DOCSIS 3.0 Cable Modem Administrator Manual

c. At the first command prompt, type

ipconfig/release

and press Enter.

d. At the next command prompt, type

ipconfig/renew

and press Enter.

e. Check whether your computer obtained an IP address other than

169.254.x.x

0.0.0.0

5. If the problem continues, power cycle the cable modem and computer:

a. Turn off the computer and turn off cable modem.

b. Turn on the cable modem and turn on computer.

Cannot Access the Internet

If the cable modem cannot access the Internet, it could be due to several reasons, such as a
failed Internet connection, a misconfigured , or a misconfigured NIC.

1. Unplug the cable modem.

Note:

If the cable modem is located where you cannot easily unplug it, you can restart it using

the Restore / Reboot page (see

“Configuring Security Settings” on page 41).

2. Turn off the cable modem for three minutes.

3. Turn off all computers attached to your network.

4. Plug in the cable modem first, turn it on, and let it boot.

5. After the cable modem completes its connection to the ISP, restart your computer.

6. Check that the cable modem

’s

ONLINE

LED is ON. If it is OFF, replace the coaxial cable

connecting the cable modem to the cable service. If the

ONLINE

LED does not go ON after

the cable modem has been powered up for several minutes, contact your cable provider to
confirm that the service is active.

7. If the

ONLINE

LED is ON, click

Status > About

and confirm that the

Network

field shows

Active

(see

“Viewing System Software Settings” on page 38). If it doesn’t, contact your

cable provider to confirm that the service is active.

8. If you have more than one network port available on the cable modem, plug the cable into

a different port. If the network connection works, the original port on the cable modem is
faulty. However, you can continue to use the other ports.

9. Close any network applications that you might have opened, especially file-sharing and

peer-to-peer applications. These applications can consume large amounts of bandwidth
that can prevent you from being able to browse the Web.

10. Ping a location on the Internet

(see “Testing the Path from a Computer to the Internet” on

page 53). For example,

ping www.yahoo.com

. If the ping succeeds, proceed to the next

step. If the ping fails:

Summary of Contents for D3CM1604

































































Search results

Summary of Contents for D3CM1604

Reviews:

Related manuals for D3CM1604

Brands by name

Popular brands

SMC Networks D3CM1604, Administrator'S Manual

Search results

Summary of Contents for D3CM1604

Reviews:

Related manuals for D3CM1604

Brands by name

Popular brands