No.D-
※
S-OMJ0002
Safety Instructions
The solid state auto switch and this manual contain essential information for the protection of users
and others from possible injury and property damage and to ensure correct handling.
Please confirm that you understand the definition of the following messages (signs) before going on
to read the text, and always follow the instructions.
Please read and understand the manual of relevant equipment or apparatus before use.
Indications
IMPORTANT MESSAGES
Read this manual and follow its instructions. Signal words such as WARNING, CAUTION and
NOTE, will be followed by important safety information that must be carefully reviewed.
Indicates a potentially hazardous situation which could result in death
or serious injury if you do not follow instructions.
Indicates a potentially hazardous situation which if not avoided, may
result in minor injury or moderate injury.
NOTE
Gives you helpful information.
Usage Restrictions
♦
This product is designed to be used in general equipment for factory automation. Never use
this product with equipment or apparatus that directly concerns human lives*
1
, or in which a
malfunction or failure can cause a great loss.
*1: Equipment or apparatus that directly concerns human lives refers to the following:
•
Medical equipment such as life support systems or equipment used in operating rooms
•
Compulsory equipment required by law such as the Fire Prevention Law, Construction Law and
etc.
•
Equipment or apparatus that conforms with those mentioned above.
♦
Contact our sales department when plans are made for the product to be used for a system*
2
or
equipment that concerns itself with the safety of persons or that seriously affects the public. Such
usage requires special consideration*
3
.
*2: The system including equipment that concerns itself with the safety of persons or that seriously
affects the public means the following:
•
Nuclear reactor control systems in a nuclear power plants, safety protection systems or
other systems important for safety in a nuclear power facility
•
Driving control systems
for a mass transportation system, and flight control systems
•
Equipment or apparatus on that come into contact with foods or beverages
*3: Special consideration refers to discussing the usage with our engineers to establish a safe
system, which is designed as foolproof, fail-safe, redundant and etc.
♦
Special consideration
*4
should be taken regarding safety or maintainability to prevent a failure
or malfunction, which can cause hazardous or cause a loss. This is likely to occur under
certain environmental stresses (deterioration).
*4: Special consideration means to fully review the equipment or apparatus during the design
stage and to establish a backup system in advance, such as a redundant system or fail-safe
system.
♦
Use for an interlocking circuit
When using this product (auto switch) as a sensor for interlock, provide a double interlocking
method such as equipping mechanical protection function in order to deal with the failure of
this product. Check the interlock system including this product regularly to ensure proper
operation.
-2-
Summary of Contents for D-NF001
Page 13: ...No D S OMJ0002 Dimensions D NF001 12...
Page 14: ...No D S OMJ0002 D NF002 13...
