![background image](http://html.mh-extra.com/html/smc-networks/d-m9-series/d-m9-series_operation-manual_1300614008.webp)
-7-
No.D-
※
S-OMG0002-E
♦
Adjustment and Operation
•Adjust the Auto switch in the middle of the operating range and then fix it.
Adjust the position of the Auto switch so that the piston stops in the middle of the operating area (where Auto switch
is in ON status).
Mounting the Auto switch close to the edge of the operating range can cause operation to be unstable.
Air grippers and rotary actuators have their own setting method. Follow their instructions.
•Turn the power on after connecting a load.
If switched on with no load, excess current may flow, causing the product to break instantly.
♦
Maintenance
•Turn off the power supply, stop the supplied air, exhaust the residual pressure and verify the release of
air before performing maintenance.
There is a risk of unexpected malfunction.
•Perform regular maintenance and inspections.
There is a risk of unexpected malfunction.
•Do not touch the terminals while the power is on.
Otherwise malfunction and damage to the product can result.
•Do not use solvents such as benzene, thinner etc. to clean the Auto switch.
They could damage the surface of the body and erase the markings on the body.
Use a soft cloth to remove stains.
For heavy stains, use a cloth soaked with diluted neutral detergent and fully squeezed, then wipe up the stains
again with a dry cloth.
♦
Other
•Contact SMC for information regarding water resistance, lead wire bend resistance.
•Contact SMC if there is a problem with the product's ON/OFF positions (hysteresis).