![background image](http://html1.mh-extra.com/html/smc-networks/crj-series/crj-series_operation-manual_1299529035.webp)
①
Assemble the stopper retainer to the stopper temporarily.
Then place the stopper retainer in the single flat position and tighten with hexagon socket
head cap screws. Leave a space of approximately 0.5mm between the stopper and the
Mini rotary actuator, as shown in Fig. (10).
Tighten the hexagon socket head cap screws evenly so that the stopper retainer is not
unevenly tightened as in Fig. (11).
Furthermore, take precautions to avoid applying excessive force to the shaft when tightening.
②
Tighten the holder assembly with hexagon socket head cap screws.
- 34 -
Tightening torque(N
・
m)
Hexagon socket head cap screw
0.8 to 1.2
0.5
ストッパ押エ
六角穴付ボルト
一面取
六角穴付ボルト
ホルダAss’y
ミニロータリアクチュエータ
図7
図8
ストッパ
Hexagon socket head
cap screw
Holder assembly
Mini rotary
actuator
Stopper
Stopper retainer
Hexagon socket head
cap screw
Single flat
Fig. 10
Fig. 11
Table 13. Tightening torque
2020-10-13 10:43
DI987004