SMC Model 1026 Engineering Specification
Rev. 100812
Page 10 of 12
40.20
The unit shall be equipped with the SMC
system, which will allow full loads to be processed in a programmable time period that may
be less than 10 minutes. Treatment shall consist of a wash, using partially re-used wash
solution, and a rinse using fresh hot water from the Owner’s supply, conducted through an
on-board heating system and a completely separate piping and spray header system. The
system shall include PID technology such that the rinse water can be applied and maintained
at an arbitrarily high temperature up to 205F (96C). Total water usage shall be 15 gallons
(95L) or less per load.
40.21 Cabinet-Style Door(s) - Cabinet-style, horizontally opening door(s) shall be provided in lieu
of the standard guillotine-type door(s). Door(s) shall be 2" thick, filled with insulation, and
shall be gasketed and sealed to prevent leakage of treatment solutions or vapor. This option
shall be chosen when available heights will not accommodate the standard doors in the open
position.
40.22 Load Shelf Type Door(s) - Load Shelf Type door(s) shall be provided in order to match
owner's existing operation and work flow. Doors shall be 2" thick and fully insulated,
complete with outrigger supports.
50.0
Available Accessories
50.1
General Purpose Wash Basket - A wire mesh basket, 20" x 20" x 5" shall be provided to
allow small items to be washed safely and efficiently. This basket shall be suitable for sipper
tubes.
50.2
Cage Processing Rack - Stainless steel rack shall be provided to process cages of any size or
shape. Samples shall be provided by the owner at time of order. The rack shall be provided
as a two-rack system to allow easier loading and handling.
50.3
Transfer Cart - A Stainless Steel cart with a plastic top shall be provided to assist in the
loading and unloading of the machine and the cage processing racks. Cart shall have soft
non-marking tires on stainless steel casters.
.
60.0
Utility Requirements
Electrical
3ph, 60hz, 6kw
Add for Elec
Heat Option
3ph, 60hz, 24kw
Steam
1 ½ FPT
30-80 PSI
350#/Hr Max Flow
250#/Hr Avg Flow
Condensate
1 FPT