SMC Networks Barricade SMCBR21VPN Manual Download Page 5

Page: 5 / 251

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE

LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES

YOU SPECIFIC LEGAL

RIGHTS, WHICH MAY VARY FROM STATE TO STATE. NOTHING IN THIS WARRANTY

SHALL BE TAKEN TO AFFECT YOUR STATUTORY RIGHTS.

* SMC will provide warranty service for one year following discontinuance from the active

SMC price list. Under the limited lifetime warranty, internal and external power supplies,

fans, and cables are covered by a standard one-year warranty from date of purchase.

SMC Networks, Inc.

20 Mason

Irvine, CA 92618

Summary of Contents for Barricade SMCBR21VPN




























































































































































































































































Search results

Summary of Contents for Barricade SMCBR21VPN

Reviews:

Related manuals for Barricade SMCBR21VPN

Brands by name

Popular brands

SMC Networks Barricade SMCBR21VPN, Manual

Search results

Summary of Contents for Barricade SMCBR21VPN

Reviews:

Related manuals for Barricade SMCBR21VPN

Brands by name

Popular brands