SMC7901BRA4 User Manual
30
3.6.4
Routing
Choose
Advance > Routing
. The
Routing
page that is displayed contains
Static Route
and
RIP
.
3.6.4.1.
Static Route
Choose
Static Route
. The page shown in the following figure appears. In this page, you can configure the routing
information. You can add or delete IP routes.
Click
Show Routes
. The table shown in the following figure appears. The table shows a list of destination routes
commonly accessed by your network.
3.6.4.2.
RIP
Choose
RIP
. The page shown in the following figure appears. If you are using this device as a RIP-enabled router
to communicate with others who is using the Routing Information Protocol (RIP), enable the RIP. This page is used
to select the interfaces on your devices that use RIP, and the version of the protocol used.