SMC7901BRA4 User Manual
19
Field
Description
192.168.2.254.
Subnet Mask
Enter the subnet mask of LAN interface. The range of subnet mask is from
255.255.0.0-255.255.255.254.
Secondary IP
Select it to enable the secondary LAN IP. The two LAN IP address must be in
the different network.
Apply Changes
Save the settings of this page.
3.4.2
DHCP Settings
Choose
LAN
>
DHCP Settings
. Select
Disable
in the
DHCP Server Setup
page. The page shown in the following
figure appears.
Dynamic Host Configuration Protocol (DHCP) allows the individual PC to obain the TCP/IP configuration from
the centralized DHCP server. You can configure this router as a DHCP server or disable it. The DHCP server can
assign IP address, IP default gateway and DNS server to DHCP clients. This router can also act as a surrogate
DHCP server (DHCP proxy) where it relays IP address assignment from an actual real DHCP server to clients. You
can enable or disable DHCP server or DHCP proxy.
Select
DHCP Proxy
in the
DHCP Server Setup
page. The page shown in the following figure appears.
The following table describes the parameters of this page.
Field
Description
DHCP Proxy
Select it, the router acts a surrogate DHCP Server and relays the DHCP
requests and reponses between the remote server and the client.
DHCP Server Address
Enter the IP address of the actual, remote DHCP server.