Installing the Wireless Barricade Router
8
System Requirements
You must have an ISP that meets the following minimum
requirements:
•
Internet access from your local telephone company or Internet
Service Provider (ISP) using a DSL modem or cable modem.
•
A PC using a fixed IP address or dynamic IP address
assigned via DHCP, as well as a gateway server address and
DNS server address from your service provider.
•
A computer equipped with a 10 Mbps, 100 Mbps, or
10/100 Mbps Fast Ethernet card, or a USB-to-Ethernet
converter.
•
TCP/IP network protocol installed on each PC that needs to
access the Internet.
•
A Java-enabled Web browser, such as Microsoft Internet
Explorer 5.0 or above, or Netscape Communicator 4.0 or
above installed on one PC at your site for configuring the
Wireless Barricade.
Item
Description
Reset
Button
Use this button to reset the power and restore the default factory
settings.
LAN
Ports
Fast Ethernet ports (RJ-45). Connect devices (such as a PC, hub
or switch) on your local area network to these ports.
WAN
Port
WAN port (RJ-45). Connect your cable modem, DSL modem, or an
Ethernet router to this port.
Power
Inlet
Connect the included power adapter to this inlet.
Warning
: Using the wrong type of power adapter may cause
damage.
LEDs
Power, WAN and LAN port status indicators.
(See “LED Indicators” on page 3.)
