C
HAPTER
4
| Configuring the Router
System Tools
– 114 –
Figure 107: Mail Account Settings
◆
From
- Your mail box address. The Router would connect it to send
logs.
◆
To
- Recipient’s address. The destination mailbox where the logs would
be received.
◆
SMTP Server
- Your smtp server. It corresponds with the mailbox filled
in the From field. You can log on the relevant website for Help if you are
not clear with the address.
◆
Authentication
- Most SMTP Server requires Authentication. It is
required by most mailboxes that need User Name and Password to log
in.
N
OTE
:
Only when you select Authentication, do you have to enter the User
Name and Password in the following fields.
◆
User Name
- Your mail account name filled in the From field. The part
after @ is excluded.
◆
Password
- Your mail account password.
◆
Confirm The Password
- Enter the password again to confirm.
◆
Enable Auto Mail Feature
- Select it to mail logs automatically. You
could mail the current logs either at a specified time everyday or by
intervals, but only one could be the current effective rule. Enter the
desired time or intervals in the corresponding field as shown in
Click Save to keep your settings.
Click Back to return to the previous page.
