C
ONFIGURATION
PARAMETERS
4-37
WEP
To automatically generate encryption keys using the passphrase function,
when Key Entry Method is set to
Hex
, enter a string into the passphrase
field, then click
Generate
. Select the
Default Key ID
from the
drop-down menu and click
SAVE SETTINGS
.
To manually configure the encryption key, enter five hexadecimal pairs of
digits for each 64-bit key, or enter 13 pairs for the single 128-bit key.
Note:
A hexadecimal digit is a number or letter in the range 0-9 or A-F.
The passphrase can consist of up to 32 alphanumeric characters.
Parameter
Description
WEP Mode
Select 64 bit, or 128 bit.
Key Entry Method
Select Hex, or ASCII.
Key Provisioning
Select Static, or Dynamic. If you select Static, you
will need to configure the Static WEP Key Setting
section. If you choose Dynamic, then 802.1X
authentication should be enabled.
