SMC Networks 8606T, Management Manual

Page: 62 / 182

C
ONSOLE
I
NTERFACE
2-46
You can use the Port Trunking Configuration screen to set up port
trunks as shown below. Remember that you must “Enable” a new
configuration before it will take effect.
SMC TigerSwitch 1000 Local Management -- SMC8606T
< Port Trunking Configuration >
Trunk ID Status Member List
1 2 3 4
--------- -------- ----------- ----------- ----------- -----------
-- -------- Port : -- Port : -- Port : -- Port : --
-- -------- Port : -- Port : -- Port : -- Port : --
-- -------- Port : -- Port : -- Port : -- Port : --
Trunk ID : 1 Trunk ID : 1 Member Port : 1
[Show] [More]
[Enable] [Disable] [Add] [Delete]
<OK>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
Trunk ID Configure up to four trunks per switch (ID of 1~4).
Port Select from 2~4 ports per trunk.
[Show] Displays trunk settings, where the first trunk listed
is specified by “Sorted by Trunk ID.”
[More] Scrolls through the list of configured trunks.
[Enable] [Disable] Enables/disables the selected trunk.