SMC Networks 8606T, Management Manual

Page: 43 / 182

C
ONSOLE
I
NTERFACE
2-27
Configuring the Switch
The Switch Configuration Menu is used to control a broad range of
functions, including port configuration, Spanning Tree support for
redundant switches, port mirroring, multicast filtering, and Virtual
LANs. Each of the setup screens provided by these configuration
menus is described in the following sections.
SMC TigerSwitch 1000 Local Management -- SMC8606T
< Switch Configuration Menu >
Port Configuration Extended Bridge Configuration
Port State 802.1P Configuration
Spanning Tree Configuration 802.1Q VLAN Base Information
Spanning Tree Information 802.1Q VLAN Current Table Information
Mirror Port Configuration 802.1Q VLAN Static Table Configuration
Port Trunking Configuration 802.1Q VLAN Port Configuration
IGMP Configuration Port GARP Configuration
BStorm Control Configuration Port GMRP Configuration
Port Security Configuration
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.
Selection Description
Port Configuration Sets communication parameters for ports.
Port State Displays current port settings and port status.
Spanning Tree
Configuration Configures the switch and its ports to participate in
a local Spanning Tree.
Spanning Tree
Information Displays the current Spanning Tree configuration
for the switch and its ports.
Mirror Port
Configuration Sets the source and target ports for mirroring.
Port Trunking
Configuration Specifies ports to group into aggregate trunks.