manualshive.com logo in svg

SMC Networks 7908A-ISP, User Manual

Share
Download
SMC Networks 7908A-ISP User Manual Download Page 82

N

AVIGATING

 

THE

 M

ANAGEMENT

 I

NTERFACE

4-49

Intrusion Detection

•

 

Intrusion

 

Detection

 

Feature

Stateful Packet Inspection (SPI) and Anti-DoS firewall protection 
(Default: Enabled) — The Intrusion Detection Feature of the Router 
limits access for incoming traffic at the WAN port. When the SPI feature 
is turned on, all incoming packets will be blocked except for those types 
marked in the Stateful Packet Inspection section. 

RIP Defect (Default: Enabled) — If an RIP request packet is not 
acknowledged to by the Router, it will stay in the input queue and not be 
released. Accumulated packets could cause the input queue to fill, causing 
severe problems for all protocols. Enabling this feature prevents the 
packets from accumulating.

Discard Ping to WAN (Default: Disabled) — Prevent a ping on the 
Router’s WAN port from being routed to the network.

 

Scroll down to view more information.

Summary of Contents for 7908A-ISP






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands