![background image](http://html1.mh-extra.com/html/smc-networks/7901bra2-annexe-1/7901bra2-annexe-1_manual_1300204080.webp)
C
ONFIGURING
THE
B
ARRICADE
4-36
RIP
RIP sends routing-update messages at regular intervals and when the
network topology changes. When a router receives a routing update that
includes changes to an entry, it updates its routing table to reflect the new
route. RIP routers maintain only the best route to a destination. After
updating its routing table, the router immediately begins transmitting
routing updates to inform other network routers of the change.
Parameter
Description
General RIP Parameters
RIP mode
Globally enables or disables RIP.
Auto summary
If Auto summary is disabled, then RIP packets will
include sub-network information from all sub-
networks connected to the router.
If enabled, this sub-network information will be
summarized to one piece of information covering
all sub-networks.
Table of current interface RIP
parameter
Interface
The WAN interface to be configured.
Summary of Contents for 7901BRA2 - annexe 1
