SMC Networks 7901BRA2 - annexe 1, Manual

Page: 25 / 134

C
ONNECT THE
S
YSTEM
2-7
Connecting the Network
Fast Ethernet Connection
Using the grey RJ-45 cable provided connect LAN port of the Barricade to
the network card of your computer or other network device, e.g., hub or
switch. The LAN LED will illuminate green to indicate a good link.
USB Connection
1. Select an available USB port on the PC.
2. Carefully insert the USB cable’s Type-A plug (i.e., the flat plug) into the
USB port and press until it is firmly seated in the port.
3. Insert the other end of the cable into the Barricade.
Connecting the Power Adapter
Plug the power adapter into the power socket on the rear of the Barricade,
and the other end into a power outlet. Check the power indicator on the
front panel is lit. If the power indicator is not lit, refer to
“Troubleshooting” on page A-1.
In case of a power input failure, the Barricade will automatically restart and
begin to operate once the input power is restored.