Installation Manual
IMN
TigerAccess™ EE
SMC7824M/VSW
25
4 Equipping the System
4.1 Installing
Uplink
Module
The switch provides the reserved slot for the uplink option module. The system will be de-
livered without the option module.
When installing the uplink option module, note the followings:
•
When inserting the option module, observe the ESD requirements for protecting the
units
(see
1.5
Components Subject to Electrostatic Discharge
).
•
When inserting the option module into the slot, be sure to insert it inside the slot
guides.
•
Fasten the option module using the fixing screw on it.
•
Install the blank panel in case of not using the option module. It is necessary to keep
EMC.
The option module is hot-swappable, so you can equip and unequip the option module
without power down. For safety reasons, however, working on the option module with
power down is recommended.
Fig. 4.1
shows how to install the uplink option module.
Fig. 4.1
Installing Uplink Option Modules
!
