A
BOUT
THE
T
IGER
S
TACK
100
1-3
Management Options
This switch contains a comprehensive array of LEDs for “at-a-glance”
monitoring of network and port status. It also includes a Network
Management Module that allows the entire stack to be managed in-band
via SNMP or RMON (Groups 1, 2, 3 and 9) protocols, with a Web
browser, or remotely via Telnet. The switch also provides a serial port on
the rear panel for out-of-band management.
Note:
Only one Network Management Module must be installed in the
stack for the current firmware release.
Description of Hardware
100BASE-FX MT-RJ Ports
These ports are MT-RJ multimode fiber ports that can be connected to
workstations and servers with 62.5/125 micron or 50/125 micron
multimode fiber cable.
Each of these ports support half- and full-duplex operation at 100 Mbps.
Note that 100BASE-FX ports do not support auto-negotiation of duplex
mode, so this has to be configured manually. However, the ports do
support IEEE 802.3x auto-negotiation of flow control, so the switch can
automatically prevent port buffers from becoming saturated.
Summary of Contents for 6924MT
