37
Any four of the following modules can be installed to the Switch.
•
8-port auto-sensing 10/100Base-TX Switch Module
•
2-port 100Base-FX (SC/ST) Fiber Module
•
4-port 100Base-FX (SC/ST) Fiber Module
•
2-port 100Base-FX (MT-RJ/VF-45) Fiber Module
•
4-port 100Base-FX (MT-RJ/VF-45) Fiber Module
•
8-port 100Base-FX (MT-RJ/VF-45) Fiber Module
•
1-port Gigabit 1000Base-F ( SX/LX ) Fiber Module
•
1-port Gigabit 1000Base-F ( MT-RJ ) Fiber Module
•
1-port Gigabit 1000Base-T Switch Module
Ports
Inside Ports page, you can enable/disable each port, configure
Speed/Duplex for each port, and assign VLAN ID.
The Port Management table shows the port status of all ports. You can
also change some properties of all ports in this table.
Figure 5-4 The Ports Page
•
Module and Port number
•
Enabled:
if this option is disabled, all packets are not received or
transmitted from that port
•
Link:
indicates whether a node links to that port or not
•
Speed:
current receive or transmit speed of 10/100/1000 Mbps
