SMC Networks 6608T-INT, User Manual

Page: 85 / 113

SNMP Parameter Configuration
In order to access the SNMP agent resident in the TigerSwitch
100 units, the switch must be configured with a valid IP address,
default gateway and subnet mask. This is accomplished
through the System Configuration Program, which can be
accessed in-band or out-of-band
(See Chapter 4, “Configuration
and Management”)
. Additional SNMP operating parameters
may also be configured through this program.
Assigning SNMP Agent Access Rights
1. Highlight “ SNMP Configuration ” in the System
Configuration Program Main Menu (See Chapter 4) and press
<ENTER>. This will access the SNMP Configuration screen
(See below).
Figure 5-1. SNMP Configuration Screen
2. Highlight “ Send Authentication Traps ” and press <ENTER>
to enable the SNMP agent to issue a trap message to
specified stations (Trap Receivers) in the event that it
receives a request containing an invalid community string.
To define valid community strings, proceed with Step 3.
Otherwise, skip to Step 5.
M
ANAGEMENT VIA
SNMP
5-4
SNMP Configuration
Send Authentication Traps Yes
Community Strings....
Trap Receivers....
Use cursor keys to choose item. Press <ENTER> to confirm choice.
Press <CTRL><N> to return to the Main Menu.