![background image](http://html.mh-extra.com/html/smc-networks/6152l2/6152l2_installation-manual_1300167044.webp)
I
NSTALLING
THE
S
WITCH
3-8
Connecting to a Power Source
To connect a switch to a power source:
1. Insert the power cable plug directly into the power socket located at
the back of the switch.
Figure 3-6 Power Socket
2. Plug the other end of the cable into a grounded, 3-pin, AC power
source.
Note:
For International use, you may need to change the AC line cord.
You must use a line cord set that has been approved for the
receptacle type in your country.
3. Check the front-panel LEDs as the device is powered on to be sure
the Power LED is lit. If not, check that the power cable is correctly
plugged in.
Summary of Contents for 6152L2
