11
3. Hold down the
[Reset]
button which is located on the back of
the device. You may need to use a pin or other pointed object
to hold the button down.
4. Plug the power connector into the Wireless Bridge while
holding down the
[Reset]
button.
5. The “TX/RX” LED will be solid, then flash 5-6 times.
6. Then the “LINK/ACT” LED will blink quickly several times.
7. Release the
[Reset]
button.
8. Unplug the power from the Wireless Bridge for 2 seconds, and
then plug the power back in.
9. The Wireless Bridge will reboot and the LEDs will return to the
normal status.
Using the Web-based Utility
1. Log into the SMC2482W Web-based Utility. (See section 4.2
for more information)
2. Click on
[Tools]
link on the left hand navigation menu, and
then click the
[Reset]
option.
Summary of Contents for 2482W
Page 1: ...SMC2482W ...
Page 3: ......
