English
6
Thank you for choosing the SMC Networks EZ-Stream
TM
Universal
2.4/5GHz Wireless Broadband Router. This EZ Quick Installation
Guide provides simple setup instructions. For additional informa-
tion and advanced settings configurations please refer to the
manual included on the CD-ROM.
Before you use the EZ 3-Click Installation Wizard, you will need to
setup your hardware connections. Use the diagram below to assist
you with setting up your network.
Hardware installation
1
PDA with Wireless
Compact Flash Card
Power
Adapter
Computer 1
Computer 2
Broadband Modem
(Cable/DSL)
5
English
5
LED (Label)
Power (PWR)
WLAN (11a)
WLAN (11b/g)
WAN (WAN)
LAN (Link/ACT)
LAN (Speed)
Color
Green
Green
Green
Green
Green
Orange
Activity
Solid LED indicates that the unit
is powered on.
No light indicates the unit is powered off.
Blinking LED indicates 802.11a signal
is working correctly.
No light indicates 802.11a signal
is disabled.
Blinking LED indicates 802.11b signal
is working correctly.
No light indicates 802.11b signal
is disabled.
Solid LED indicates a LAN connection
was detected.
Blinking LED indicates traffic is being
transmitted through the WAN connection.
No light indicates a WAN connection
was not detected.
Solid LED indicates the WAN connection
is detected at 100Mbps.
No light indicates the WAN connection
is detected at 10Mbps.
No light indicates a WAN connection
was not detected.
Solid LED indicates the WAN connection
is detected at 100Mbps.
No light indicates the WAN connection
is detected at 10Mbps.