2.5 Drivers and Utilities CD
The [Divers/Manual] CD contains drivers for all popular operating systems:
Novell NetWare(client /server)
Windows NT3.5/NT4.0/2000
Windows 95/98/ME/XP/Vista/Win7
Microsoft Client (NDIS 2.0 DOS/OS2)
Windows For Workgroup 3.11
MacOS 10.1
Linux Kernel 2.4 or later
2.6 Test Program
Note:
This test program verifies the configuration of the adapter and helps to isolate any faults in the
operation. The test procedures are optional, and will only be useful in the unlikely event that there is a
problem, such as an interrupt number conflict among your computer’s add-on cards. If your adapter
provides normal operation, you don’t need to follow the test procedures.
At your DOS prompt, type the following command (considering your CD-ROM drive is E:):
E:\rset8139.exe <Enter>
A menu will open as follows below:
View Current Configuration
Set Up New Configuration
Run Diagnostics
Exit RSET8139
Choose <Set Up New Configuration> to set up the Network Speed, 10Mbps or 100Mbps, and
Transmission Mode, Full- or Half Duplex, and so on.
Choose <Run Diagnostics> to run the adapter test program.
Adapter test program includes:
<Run EEPROM Test>,
<Run Diagnostics on Board>,
<Run Diagnostics on Network>, and
<Run Power Management Test>.
After choosing the <Run Diagnostics on Board>, you will see the following screen:
Node ID........: 00 e0 7d c0 00 01
Network Speed..: 100Mbps
I/O Base ......: E000H
Interrupt .....: 11
Full-Duplex ...: Disabled
The test program can not be used in Windows 95/98
DOS mode. Do not load any device drivers, memory
manager, and anti-virus software. The test program
can only work in clean DOS prompt.
