Technical Information
smb
Trampoline
“modulus 90”
Seilspielgeräte GmbH Berlin
page 3
Technikerstraße 6/8
15366 Hoppegarten
Telefon (0 33 42) 5 08 37 20
Telefax (0 33 42) 5 08 37 80
Assembly and removal of the jumping mat
The trampoline is supplied with a suspended jumping mat in the frame. The jumping mat only needs to be
removed when damaged or when the trampoline is cleaned.
Removal of the jumping mat
Using the tool supplied, the springs can be loosened from the suspended mat from the top
(image 3)
.
To
do this, the hock is suspended in the eye of the tension spring which opens from the bottom and slowly
pulled onto the rope which is fastened onto the hook. If the spring extends enough, then the eye, which is
suspended on the jumping mat, falls down automatically. It is the same procedure for the side of the
thimble
(image 2).
Assembly of the jumping mat
When assembling the jumping mat, make sure that the sides of the mat with the chains
(image 3)
face
towards the straight side
(image 2).
longitudinal direction:
connection thimble
cross direction:
connection chains
1) tighten the spring
2) clip the spring into the eye
3) release the spring
Image 3
