1
Ground anchor with slide block
2
Plastic washer
3
bolt M10x8 A2 DIN 916 Torx30
4
ROWOCON
®
-connection
5
Screw M16x70
6
Rope of the goal net
7
Lock washer
Technical Information
smb
Seilspielgeräte GmbH Berlin
Technikerstraße 6/8
Type BT 02
D - 15366 Hoppegarten
Phone +49 (0)3342 50837 20
Fax +49 (0)3342 50837 80
www.smb-seilspielgeraete.de
Page 3
Screwing the smb-citytor II with the ground anchors
The
ROWOCON
®
-sleeves (4)
in the side parts of the smb-citytor original II are to be provided with
screws M16 (5)
and
lock washers (7)
. The
ropes (6)
of the goal net are not fixed at this point
(Figure
4)
.
Remove the safety covers of the ground anchors with a screwdriver
(Figure 3)
. The entire goal is to be
adjusted via the
ground anchors (1)
. We recommend the storage of the safety covers for a possible
reuse later on.
Now the supplied
screws M16x70 (5)
and
lock washers (7)
can be bolted with the help of the provided
socket key insertion. The flexibility of the slide blocks in the
ground anchors (1)
can balance dimension
inaccuracies. The
safety caps (figure 3)
close the openings of the
ground anchors (1).
After having bolted everything, the
ropes of the goal net (6)
need to be inserted into the
ROWOCON
®
-
sleeves (4)
and screwed in with the
setscrews (3)
by using the torx socket key T30.
Figure 3
Figure 4
