Version: 1.3
Date: 31.03.2022
Page 11 z 11
Operation and Maintenance Manual
CDH-F
6.
TRANSPORT AND STORAGE CONDITIONS
CDH-F louvres are delivered wrapped in foil.
The product should be stored in closed rooms providing protection against weather conditions.
Always secure the product against moving during transport. Stacking products is unacceptable.
During transport products should be protected against weather conditions. After every delivery it is necessary to carry
out a visual inspection of the elements. Do not expose to mechanical damage.
7.
INSPECTION AND MAINTENANCE PROCEDURE
CDH-F louvres installed in ventilation systems must be inspected at least once a year to check their operation. Every
inspection shall be recorded in the form of a protocol.
In order to check the correctness of CDH-F louvers operation, in particular, it is necessary to:
Check the lamellas and seals.
Check if the louvres are clean; clean if necessary.
Check the actuator wiring.
Carry out a visual inspection for corrosion of metal parts.
Carry out the opening and closing test of the unit lamellas.
If there is an actuator with a return spring mounted (BFN, BF), turn off its power supply. The outlet lover has to open.
Connect voltage to the louvre. The outlet lover should close.
If the damper opens and closes correctly, close it and leave in the closed position.
Of an open-close actuator is installed (BLE, BE), open the louver by means of a controller. The louver has to open.
Then close the louver by means of a controller. The louver should close.
If the louver opens and closes correctly, close it and leave in the closed position.
Make an inspection report.
Notify the Manufacturer in the event of any defects.
8.
WARRANTY TERMS
o
The Manufacturer warrants the products supplied according to the provisions of the Agreement or the General
Warranty Terms and Conditions of Smay Sp. z o.o.
o
The warranty does not cover defects caused by improper storage, transport, installation of the element and,
especially, mechanical damage and defects of the anti-corrosion coatings.
o
The Warranty is void when it is found that the User made structural modifications on his own or installed the
product not in accordance with the Operation and Maintenance Manual.
