27
server on your local area network, you must use this
option to specify an IP address.
IP Address(IPv4): Input IPv4 IP address*
IP Address(IPv6): Input IPv6 IP address*
Prefix Length: Input IPv6 IP address’ prefix length
(0-128)
Subnet Mask: Input subnet mask
Gateway: Input gateway address
Primary DNS: Input DNS server’s IP address
Secondary DNS: Input backup DNS server’s IP
address, you can leave this field blank.
*You can leave this field blank, if you only wish
to use IPv4 or IPv6 IP address.
-
Enable UPnP Discovery: Check this b ox to enable
other devices on network to discover the presence
of this IP Camera Module by UPnP. It’s
recommended to enable this function.
-
Enable UPnP Port Mapping: When UPnP is enabled,
check this box to enable UPnP’s port mapping.
PPPoE
Select this option to use PPPoE to connect to network.
You have to input PPPoE username and password
assigned by network operator to get connected.
HTTP Port
Input IP Camera Module’s web connection port number
here. When this port number is changed, you need to
change web browser’s port number you used to connect
to IP Camera Module.
For example, IP Camera Module’s IP address is
192.168.1.1, and if you changed HTTP port number to
82, please input ‘http://192.168.1.1:82’ in web browser’s
address bar to access IP Camera Module’s web
configuration interface.
