w w w . s m a x . c o m . t w
P 49
Chapter 5.
5.3.4. PTZ Control
PTZ Control
to GU1 model is about RS-485 setting.
Network camera can be mounted to a pan-tilt cradle
via RS-485 connection.
RS-485 Setting Procedure
：
Select
PTZ Control
button under the
Configuration
menu.
Select
Enable RS-485.
Enter
Baud Rate, Date Bits, Parity and Stop Bit
numbers under the
Port Setting
column.
Select
Communication Type.
Suggest to choose
Pelco-D.
Then press
Apply
button to complete setting.
Notification
：
For further detail setting, please refer to the pan-tilt
cradle that you select. We suggest to get one which
supports
Pelco-D
standard.
