Drive Recorder Settings – Alarm Triggers
To record the car signal with video, set the Alarm configuration as below,
To use the Alarm as an Event trigger, (i.e.: so Event recording will start when a
door is open or Meter is on) set the Alarm configuration as below,
G-Sensor setting
If G-sensor sensitivity value is too high like 5, it becomes too sensitive, so it will
detect even a light impact or light turn. If G-sensor sensitivity value is too dull, so it
might no detect a notable incident.
So, sensitivity should be set in consideration of a vehicle’s suspension, condition
and also the road condition.
If you don’t want to record an Event triggered by G-sensor, un-check Event
Record box.
25
To use the Alarm as a changing live Display trigger, set the Display configuration,
