APPENDIX (Firmware Upgrade)
Make [program] folder at SD root folder as below,
First, upgrade the BX1500/ main unit,
Second, install new PC viewer software on your PC,
and then initialize the SD card using new PC viewer software.
Copy “BX1500_X.X.X.bin” file in to the SD card [program] folder.
.
1. Preparing Firmware
2. Upgrade BX1500/
Insert the prepared SD card to BX1500 Series and turn on the power.
The Blue & Red LED will be quickly blink while the unit is upgrading.
It will also “Beep” continuously, Upgrading the unit usually takes about
2 to 3 minutes.
Warning: Do not turn off the power during upgrading.
If the upgrade fails, the “Smarty BX1500/” unit should be
returned to your local distributor.
Once the upgrading is finished, the unit will automatically turn off and on the power.
[NOTE] To get the upgrade firmware, please contact your local distributor.
New firmware is released occasionally by D-Teg.
If BX1500 series records as normal, turn off the power.
Insert the SD card into your PC and initialize it using the software once
you have successfully tested the unit.
41
