OPERATION
1.
Connect your vehicle‟s power cable to the BX1500/ after
starting the vehicle.
2.
Blue LED & Red LED will be slowly blinking simultaneously and then
Blue LED will remain on. Blue LED light means BX1000/ is
now ready for the event recording.
3.
The event recording will automatically begin by G-sensor with one short
“Beep” sound.
4.
The manual recording will start by pressing the [RECORD] button.
[Notice] Multiple impacts coverage
Flash memory continuously captures the video data during the second or third
impact and record it to the first impact file.
Take out SD memory card
Turn off the power and then check the BLUE LED light. Once the LED light
is off, take out the SD memory card.
9
Insert SD memory card
System Error Buzzer
“Beep” “Beep” sound will occur and the BLUE & RED LED light will blink
simultaneously when there is a system error or SD card is not inserted.
[Check the SD memory card when this occurs. To solve the problem, initialize
the SD card or replace the SD card.]
Turn off the power and then check the BLUE LED light. Once the LED light
is off, insert the SD memory card.
When Record Method set as “Event record”
1.
Connect your vehicle‟s power cable to the BX1500/ after
starting the vehicle.
2.
Blue LED & Red LED will be slowly blinking simultaneously and then
the Blue LED will remain on and flash every 5seconds.
3.
Blue LED light flashing every 5 seconds means BX1500/ is
now recording continuously.
4.
The continuous recording(normal recording) will automatically begin just
after power on.
5.
The manual recording that started by pressing the [RECORD] button or
the event recording by G-sensor make a event making in the continuous
recording file.
When Record Method set as “Normal record”
