background image

 

www.smartwitness.com 

 

1.

 

Overview: 

The SmartWitness KP1S is the world’s most advanced incident camera with powerful 3G 
or WiFi video transmission, built-in GPS tracking and drive data. Developed to provide 
evidence of events leading up to and during a road traffic accident, the KP1 provides 
instant notifications and videos of incidents in less than a minute. 

KP1S features a 720p wide angle HD camera, 3-Axis G-Sensor, Microphone, SD storage, 
integrated GPS receiver, USB input (for 3G or WiFi modem), permanent power cable with 
vehicle input triggers, and a tamper-resistant design. 

 

 

Benefits: 

The KP1S features a 720p HD wide angle (170°) lens to provide a comprehensive view 
of any road event. The KP1S will record exactly what happened before, during and 
after an incident. It does this by recording the following information: Drivers view of 
the road, Vehicle Location, Impact Force of Accident, Audio, and Driving Style (speed, 
acceleration, braking, and steering)

 

This evidence can protect a driver from many of the issues faced on the roads 
today: Insurance fraud, Staged Accidents, False/Exaggerated Whiplash Claims, 
Conflicting Reports of Actual Events, Driving Offence Allegations (speeding, traffic 
signal violations, swerving, etc.)

 
When a 3G SIM card is used with KP1S, video, images, and driving data is transmitted 
in real-time via a cellular network. Customers can use the KP1S to transmit safety-
critical video directly to a server (SmartWitness server software required), or integrate 
with Telematics Software (Please contact us for a list of compatible telematics 
software). The KP1S can also be used as a stand-alone system utilizing only the SD 
cards to review video and data with SmartWitness’ free PC analysis software. 
 

For more info on KP1S, please visit: 

smartwitness.com/3G-Dash-Cameras/KP1S

  

For literature downloads or support, please visit: 

support.smartwitness.com

 

 

Summary of Contents for KP1S













Reviews: