17
Changing Operation & Alert Settings
◊
Press the
NO
and then
WEEKDAY
buttons together.
◊
Each setting appears at the Temperature Set Point location.
◊
Pressing the
UP
or
DOWN
button to change each Setting.
◊
Press the
RUN
button to accept each Setting and advance to the next.
Reviewing All Operation & Alert Settings
◊
Press the
NO
and
WEEKEND
buttons together.
◊
Type of System appears at the Temperature Set Point location.
◊
Press the
DOWN
button to advance. Press
UP
button to go back.
◊
For Alert Settings: Filter Period, (Call for) Service Period and UV Light Service Period, review
shows accumulated months. This is a useful way to see how long it’s been since filters where
checked, system was serviced and UV light bulb changed.
◊
Press
RESET
to quickly exit after reviewing accumulated months.
Calibrate Indoor Temperature
1
Press the
UP
and
DOWN
keys together and hold until
Indoor Temperature starts to flash.
2
Release.
3
Press the
UP
or
DOWN
key to raise or lower Indoor
Temperature to desired setting.
4
Press
RUN
when done.
Note: Indoor Temperature can be raised or lowered a maximum of 4º F / 2º C from the original
Indoor Temperature. Therefore, the maximum calibration range is 8º F / 4º C.
“Flashes”
Press Together
1
