27
GB/IE
Initial use
Switching the product on / off
Lay the mains cable in such a way that nobody will step on or trip
over it.
To switch the product on, plug the mains plug
4
into a properly
installed mains socket.
Note:
Insert the mains plug
4
into an IPX4 plug socket to
guarantee the protection against splashing water.
To switch the product off, remove the mains plug
4
from the
mains socket.
Installing the product
You can mount the product on a tripod or a wall, or hang it up using
the fold-out hook
6
.
To mount the product on a tripod (not included in the scope of
delivery), use the fixture for tripod installation
7
. Proceed as
described in the instructions for your tripod.
To mount the product on a wall, use the fixture for wall installation
8
. Information on suitable installation material can be obtained
from specialist stores.
Note:
Pay attention to the cable length (3 m) when mounting the
product on a wall.
If you would like to hang up the product using the fold-out hook
6
,
make sure that the chosen hanging location is suitable for bearing
the weight of the product (approx. 955 g).
Note:
Pay attention to the cable length (3 m) when mounting with
the hinged hook.
353561_2010_par_LED-Arbeitsstrahler_A6_content_OS.indd 27
353561_2010_par_LED-Arbeitsstrahler_A6_content_OS.indd 27
24.03.21 11:30
24.03.21 11:30
